Worm drive gearbox with motor
A robust worm-drive gearbox powered by an MM28 motor. Ideal applications where an easy to match, high torque result is required. Great for student based projects including robots and buggies.
The unit has been designed to ensure that the output shaft could be ‘clicked’ in and out for modification. Electronic.g. reducing to size. The electric motor is snap fitted into its cradle to activate the apparatus and worm.
1 – 6V DC
0.1A to 1A depending on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
General dimensions of box + engine: 35(W) x 40(H) x 60(L)mm
The primary feature of the high-efficiency gear box is a worm gear, which locks the output shaft whenever the engine isn’t turning. The high equipment ratios of 216:1 or 336:1 make this gearbox appropriate for little walking robots, lifting mechanisms, and other applications where high torque can be desired.
The low-voltage motors in the worm gearbox operate on 1.5-4.5 volts and draft to some amps, making them ideal applicants for the DRV8833 motor driver carrier. Motor overheating can be due to excessive stalling, also at very low voltages. We recommend that you use stall-detection sensors, or just watch your robot, to ensure that it doesn’t stall for more than a few seconds at the same time.
This gearbox has a 4 mm diameter, round output shaft, which works together with the wheels that are appropriate for Tamiya 4 mm, round shafts. Our 3 mm universal installation hub also matches on small threaded end of the shaft, though it is not particularly intended to work with this kind of shaft (the hub’s set screw could damage the thread on the shaft).
Ever-Power gear motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right angle worm geared motors established new criteria for reliability, efficiency and economy with unparalleled features including hollow shafts in the tiniest sizes. An inverter friendly style provides for easy integration right now and a truly future proof solution. The Ever-Power gear engine offers total versatility in mounting options includes shaft, base, face, and flange solutions. The electric motor terminal box could be mounted in choice positions rotated in 90º steps around the motor frame offering for unparalleled integration options.
Ever-Power gear motors adhere to North American and International criteria, including NEMA, IEC, CSA, and CE, the Ever-Power series permits worldwide acceptance, a genuine total worm motor alternative for our global customers.
Excellent protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dust tight and hose evidence,and can be used outdoors or in wet and dusty environments without the use of additional enclosures. Full rated output is available at the result shaft of the unit.
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change first after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Connecting with Connect connectors.
With integrated inverter up to 7,5kW.
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm equipment motors are the alternative for applications requiring a part turn, optional dual result, or an inability for the motor to be back driven. The DC right angle equipment motors are designed for continuous and intermittent duty procedure. Our right angle gear reducers were created with a number of mounting plate choices, making them well suited for a number of DC motor based applications. You can expect 12 ratios which range from 5:1 to 100:1.
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Regular brush life of 2000+ hours (varies by application)
EP Products Worm Equipment Motors are created to generate high torque in a small package size. Worm Equipment Motors are great for applications that require a personal- locking or breaking feature because the result shaft can’t rotate when there’s no power applied. Additionally, Worm Gearheads can transfer motion in 90 degrees. With various reduction ratios, precision cut gears, voltages and sizes, EP Products has a DC Worm Gear Motor solution for the application.
Features and Benefits
Very High Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Capability to Handle Large Gear Decrease Ratios
Protection Door Locks / Industrial Conveying Systems / Security Gates / Dental Chairs / Ambulance Cots & Stretchers Many of our DC Motors can be complimented with among our Worm Gearheads. EP Items will continue to work with you to design and manufacture a Worm Gear Motor that may optimize the performance of your specific application.
Built to your specific requirements
Electric motor Type: Brushed / Brushless / Coreless
Shaft Material & Size
Shaft Configuration: (D Cut / Round / Splined / Other)
Overall Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Additional Assembly Requirements (lead wires, connectors, etc.)
The turbo metal gear worm motor runs on the metal gear box for sturdiness and a higher torque output. Because of the special mechanical structure of the worm drive the electric motor output shaft is usually self locking and can not be rotated.
This part uses a two wire connection and supports direction control along with PWM speed control. Rated voltage is 12v and will achieve 40RPM, with a torque of 8kg/cm.
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Ranked Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear devices from EP DRIVESYSTEMS especially display their strength in applications where high equipment ratios are essential. Our worm geared motors are as a result optimally suited for make use of in intralogistics, packaging technology and the food & beverage industry.
Four great reasons for EP worm geared motors:
Our worm geared motors have a higher overload capacity
Washdown versions allow simple and effective cleaning of the drive system.
The NSD tupH sealed surface conversion is exceptionally chemical substance, corrosion and abrasion resistant.
Our modular style give users maximum freedom.
The modular system for optimum flexibility: Our EP worm gear units
There are many applications that require drive systems, and each one of these has its own unique requirements. The EP series worm equipment motors could be quickly and effectively adapted to satisfy your needs.
Worm gear units impress with their high power density and compact design. If required, we are able to also supply them with the highly effective nsd tupH surface treatment.
As well as the basic EP casing, you can expect an extensive line of bolt-on elements to customize the product including torque arms, shaft covers and output flanges. These can be quickly field installed, but we may also be happy to assemble the individual components for you.
Discover more about the modular SI worm geared motors!
Find out more
Simple and Clean: The EP worm gear unit SMI
SMI worm gear products feature a smooth, corrosion-resistant alluminum alloy housing. Optional nsd tupH surface area conversion makes the product ideally suited for harsh and challenging industries like food processing and pharmaceuticals.
Versatile input designs such as NEMA, IEC or direct motor mounts in extra foot or flange mounted housing designs.
Worm geared motors
Worm geared motors for little power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared engine program. The units have got on all sides different repairing possibilities and enable a simple assembling for the client.
Various other drive configurationscan be created by use of built-on components (e.g. torque arm and output flanges). The housings are made in light weight structure out of aluminium die cast. Electric motor attachment is realised generally by means of IEC adapter B5 or B14A.
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:result shaft, output shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm
Buy Worm Drive Gearbox with Electric motor – incorporating the next features: 1 to 6V voltage rating, 17100 rpm no load speed, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm wide, 40mm high, a robust worm drive gearbox powered by an MM28 electric motor (included), most ideal for applications where a simple to match, high torque result is required, nylon housing and equipment, requires light essential oil or silicon grease lubrication, ideal for student based tasks including robots and buggies.
Most ideal for applications where a simple to match, high torque result is required
Perfect for student based projects including robots and buggies
Reversible High torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
Reversible High torque Turbo Worm Gear Motor JGY370 DC 12V 40RPM
The motor is Gear DC electric motor with micro-turbine worm, you can transform the wiring-connection to improve motor rotation.
Turbo worm geared electric motor with self-lock, that’s, regarding motor without electric, the output axis can be fixed, self-lock.
The reducer output shaft arranged vertically with the electric motor shaft, whole engine output shaft relatively-short than general gear engine, widely used to be installed the dimensions requirements strictly occasion.
No load speed: 40r/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Application: open the windowpane, door, Mini winch. Ect.
In sumo robot or combat robot competition where high holding torque’s electric motor is essential to avoid your robot being pushed by your opponent robot. The worm equipment is definitely a better option when compared to spur gear motor. How come worm gear so particular? Take a look wiki out: Worm Drive.
“Unlike with ordinary equipment trains, the path of transmission (insight shaft vs output shaft) isn’t reversible when using large reduction ratios, due to the greater friction involved between the worm and worm-wheel, when usually an individual start (a single spiral) worm is used. This can be an advantage when it is desired to remove any probability of the output driving the input.”
In other terms, it is difficult to push your load (example, your robot) if the motor is not power or rotate.
Features and Spec:
Metal gear box
Result shaft is self-locking because of the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Worm drive gearbox with motor