Split Taper Bushing

Additional Features:
Made of Steel
For use with cast iron bushed bore pulley
This U1 Bushing with 5-1/2″ bore is a high-quality precision product that’s built for toughness and strength. U1 bushings are used in an extensively wide variety of applications, which include; sprockets, shaves, pulleys, gears, plus much more, we as well offer all of these products. What sets this bushing apart is the high-quality steel building along with specific manufacturing and high quality control; this ensures that you always get yourself a premium quality consistent product. What really sets us apart from the other guys is our highly trained expert staff members and our company-wide aim of customer satisfaction.
1. Be sure the tapered cone floors of the bushing and the within of the driven product are clean and free from anti-seize lubricants.
2. Place the bushing in sprocket or additional part type that accepts the bushing.
3. Place cap screws loosely in pull-up holes. The bushing remains loose to make sure sliding match on shaft.
4. With important on shaft, slide the sprocket or other part type to the desired situation on the shaft. Make sure you keep the heads of the cap screws available.
5. Align the sprocket or portion type, tighten the screws on the other hand and progressively until they happen to be pulled up tight. Do not employ extensions on the wrench handles and do not allow the sprocket or part to become drawn i contact with flange of bushing. At this stage there must be a gap between your bushing flange and sprocket, make certain this gap will not close.
Double split barrel ensures concentricity
Grips the shaft with great clamp fit
High torque carrying capacity
Permits blind assembly
Load not carried or limited by mounting screws
External key of all sizes for confident drive and increased torque carrying capabilities
Double-split barrel for great clamping
Solid flange to maintain concentric bores
Available in “, metric, and spline bores. Bore range between 3/8″ to 10”
Solid Flange & Dual Split Barrel – Assures better concentricity to the shaft.
Key to Key Travel – With keys on both the shaft and product to supply the strongest possible travel.
3/4″ per Foot Taper on Barrel – Personal locking taper supplies the highest amount of mechanical locking product to product.

Taper bushing are widely used as well as sprockets, v-belt pulleys, timing pulleys, coupling and other mechanical parts with taper bore connections.
Taper bushing series are created from high quality engineered components with wonderful tolerance. The characteristic is easy to apply and needs no further alteration. These bushings can match almost a myriad of assemblies and sizes. They are the best choice in design for mechanical connections.
To complete designations add bore size. For instance: PD1215X16MM designates a 1215 taper bushing with a 16mm bore.
No costly re-boring: full range of both metric and imperial offered.
Standard range fits up to 125mm/5″ shafts & Hub diameter required depends on the application.
Complete short reach range available, for compact light-weight assemblies & Clean, Compact Design.
Simple installation and removal.
This Split Taper Bushing is designed exclusively for use with cast iron bushed bore pulleys and will be purchased on a single page as the pulley you need.
For use with 1 3/16” shaft sizes.
Comes with 2 set screws.