Equipment Boxes For Rotary Cutter’s, Shredders, and Choppers
RC thirty Sequence Gearbox, 40hp Rated, one-three/eight” SB input, 1-1/two” X twelve Spline Output. one:1.47 Ratio Substitute your damaged rotary cutter gearbox with this alternative device. Why rebuild when you can replace at such a low value? These gearboxes have been employed by Worksaver, HawkLine, Global, WAC, Huge Bee, LMC, King Kutter, Midwest, Servis, Bush Hog, some Howse and several much more. Note: Real Gearbox may possibly have a rounded housing or square as shown, based on existing availability, all inside components are interchangeable and technical specs for each boxes are equivalent! This gearbox functions a 1:one.forty seven Pace Up equipment ratio for use on 5′ and more substantial diameter rotary cutters. Market normal 1-3/eight” smooth diameter input shaft with one/2″ shear bolt gap and retaining ring groove and 1.57″ diameter twelve tapered spline output shaft enable fitment to most gentle, regular and medium responsibility rotary cutters. Each and every gearbox features large speed ball bearing units and heat handled gears and shafts to make sure extended life. Four bolt mounting matches business requirements. Every gearbox involves blade carrier mounting nut and cotter pin. Gearboxes are delivered dry and require 16 ounces of 80-90W gearlube or equivalent. Disclaimer: Any and all Unique Products Manufacturer’s (OEM) tradenames, logos, drawings, hues, descriptive data and element figures are employed for parts identification functions only, and DN Gear, LLC (DN) is in no way implying that any distinct areas are OEM areas. More, any use of the OEM’s tradenames, trademarks, drawings or component figures by DN is designed only to assist DN’s consumers, in obtaining the appropriate DN portion or component which will replace the OEM’s element.
rotary cutter gearbox
Gearboxes operate to administer a transfer of pace and torque via their interior gear rotation, assisting the total efficiency of your rotary cutter. This RW-710-6S gearbox operates at seventy five-ninety HP. The housing is made from durable ductile iron and the enter shaft steps one-3/8 in., with 6 splines. It has a equipment ratio measuring 1:1.46, and is developed for use with five ft., six ft., and 7 ft. rotary cutters. More dimension and far more HP manner make sure you get in touch with us for information.