ep

November 22, 2019

ANSI-CERTIFIED ROLLER CHAIN SPROCKETS
Industrial chain sprocket breakages can bring your machinery to a grinding halt. Many machines can’t operate without their drive teach sprockets, and replacing them can cost lots of time and money. Additionally, the efficiency of a conveyor or drive depends upon sprocket-chain interaction. Using the proper sprocket is simply as important as selecting the most appropriate chain. At Ever-power Roller Chain, we offer a wide selection of standard roller chain sprockets at unbeatable prices. Our sprockets are designed to perform well under pressure and are resilient. The roller chain sprockets for sale in our shop include single-strand roller chain sprockets, double strand sprockets and multi-strand roller chain sprockets. Furthermore, our drive chain sprockets meet both ANSI and ASME requirements.
We’re positive you’ll become happy when you get industrial chain sprockets in our shop, because they’ll last you a long time. If you’re uncertain what sprockets are the ones you need for your machine, make sure you don’t hesitate to provide us a contact. Our knowledgeable staff, superior products, and unbeatable prices are the reasons for our A+ BBB rating!
One STRAND ROLLER CHAIN SPROCKETS
There are six different standard varieties of sprockets for single strand roller chain. We share a complete type of each type! Our standard one strand roller chain sprockets are manufactured with hardened teeth (for tooth counts under 30), used premium quality SAE 1045 steel material, and are completed with black-oxide for corrosion resistance.
To start out shopping simply select what chain size you are using with your sprocket. Next select the type needed, lastly select the desired tooth count and possible accessories needed, you then are ready to get your sprockets! If at any point you have questions or difficulty finding or picking your sprocket please get in touch with our customer support department and we will be happy to help you.
DOUBLE SINGLE SPROCKETS
Double single sprockets are created to run two single-strand type roller chains, this is where the name “double single” came from. Typically these sprockets are A style but both BTB taper bushed and QD style is available from share. Our double single sprockets are produced with hardened the teeth and have a dark oxide coating for excellent performance and a slight corrosion resistance. Stock sizes of double one sprockets range between ANSI #40 – #160 but additional sizes could be manufactured upon request. We can also supply quick response custom re-bores and MTO specialized double single sprockets because of our quick response in-house machine shop. Something vital that you note is that despite the fact that these sprockets are double sprockets they’ll not double-strand roller chain. The charts below display the in-stock double solitary sprocket sizes and have clickable links to the product pages themselves.
ROLLER CHAIN SPROCKET NOMENCLATURE
Different sprocket manufactures utilize different “conditions” or nomenclature to describe their sprockets. Though, throughout the general history of roller chain sprockets almost every produce utilizes four different types of sprockets and has followed the same nomenclature for them.
STANDARD SPROCKET STYLES
Style A, also known as A-Plate or simply “plate sprocket” can be a flat sprocket plate-wheel with no hubs that extrude upon either side.
Style B, also called B-Hub sprockets is a sprocket with a hub that extrudes on one side.
Style C, also referred to as C-Hub sprockets is certainly a sprocket with a hub that extrudes on both sides.
Style D, is a sprocket with a detachable bolt-on hub mounted on a plate.
MULTI-STRAND ROLLER CHAIN SPROCKETS
Multi strand roller chain sprockets will start with a prefix except when past 4-strands. We supply single through twelve (12) strand roller chain sprockets in the four regular styles as well as many other styles upon request.
D – Dual Roller Chain Sprockets/ Duplex Sprockets
E – Triple Roller Chain Sprockets/ Triplex Sprockets
F – 4 Strand Sprockets/ Quadruple Sprockets
DS – Double Single (these sprockets are made to operate two single-strands of roller chain side parallel to one another)
COMMON SPROCKET STYLES
QD style sprockets, also referred to as “quick detachable” make use of a tapered bushing that is bolted in to the bore that is machined in the sprocket. When the bushing is certainly inserted in to the sprocket is compresses onto the shaft, which provides a tight grip.
Taper Bushed sprockets, commonly designated with TL, BTL, CTL, TB, BTB, or CTB is another design of interchangeable bushed sprockets that provides a positive grasp on the driven shaft.
Shear Pin sprockets use a shear pin type hub that is bolted to a sprocket to provide an overload gadget. If the torque ranking is definitely exceeded the shear gadget disengages the sprocket from the drive.
Split type roller chain sprockets are manufactured for quick installation without disruption of the shaft and alignment.
SPROCKET PART NUMBER NOMENCLATURE
When identifying a sprocket with a part quantity, standardly the chain pitch will be created first, then your hub design or code, and accompanied by the number of tooth the sprocket has. If the sprocket is definitely multi strand there will frequently be a letter prefix at the beginning of the part quantity.