ep

December 22, 2020

Highest wear resistance accessible by sealing grease between pins and bushings
The sturdiness of chain is dramatically enhanced since grease is sealed concerning the pins and bushings by O-rings. The O-ring chain is the most dependable model from the Ultimate Existence Chain Series with its excellent dress in resistance even inside the situations or environments where chain upkeep is challenging.
Recommended utilizes.
?Situations exactly where frequent chain replacement is needed because of dress in stretch
?Conditions exactly where lubrication through the service is extremely hard
?In an environment with considerably soil, sand, dust, etc.
?Applications that need strength greater than that of a sintered bushing roller chain
Other options
?Decreasing noise. (The noise degree is three dB decrease compared to standard roller chains.)
?Decreasing vibration together with the friction made by O-Ring. (The electrical power loss due to the friction is nearly negligible, because the frictional force in between the pins and bushings is for commonly in the applications.)
Variety of chains
The power of an O-ring chain is almost the identical as that of the common roller chain. (Because the pins are longer than these of regular roller chain, the average rupture power is slightly lower.)
For picking an appropriate chain, refer to “Selection of Chains” .
Once the services ambient temperature is increased than 80° C, unique heat resistant O-rings must be applied. In this case, make contact with us for extra details.
Connecting hyperlinks and offset backlinks
Two sorts of connecting hyperlinks can be found: clearance fit and interference fit. When large strength or durability is needed, use interference-fit connecting link. Only 2POJ is accessible as the offset hyperlink for all sizes.
Sprockets
O-ring chain employs longer pins than a normal roller chain. When employing multiplex O-ring chain, the normal sprocket for multiplex chains can’t be applied.
Caution
O-ring chain isn’t advisable in applications where solvents or other substances may perhaps assault “Nitric Rubber”. Special material O-rings may also be available for these disorders: Please consult us for specifics. Normally, “Nitric Rubber” is broken by contact with all the following chemical materials.