The EP Series Helical Bevel Reducer provides unmatched performance, durability, and design flexibility. This unit offers torque capacities up to 20,000 Nm (14,750 ft pounds).
The cat4CAD software enables simple interactive product selection of the complete gearbox and gear-engine system. Cat4CAD supports you in selecting and configuring the products, provides you the opportunity to print out considerable technical data bedding, and generates complete 2D drawings and 3D models for direct download.
11 sizes
Insight power capacities from 0.16 to 120 HP
Gear ratios from 5:1 to 8900:1
Torque capacities to 20,000 Nm
Inverter duty class F insulated motor windings
Course 12 Helical and Spiral Bevel Gears: Provides higher efficiencies and greater torques in smaller sized sizes.
Multiple Input Options: Integral gear motors, inch or metric shafts, NEMA, IEC, and servo adapters provide unmatched drive versatility.
Multiple Output Options: Hollow bores and shrink disks for shaft installation, inch and metric output shafts, installation pilots and flanges offer an array of design solutions.
UNIBLOCK Housing: For optimum rigidity, universal installation on five sides or with a torque arm.
Worldwide Motor: Multiple leads and windings for worldwide multi volt/Hz requirements in addition modular design to simply accept brakes, encoders or pressured cooling.
High efficiency motor design available
Innovative self-locking, self-aligning taper shaft motor connection
Gearbox supplied factory filled up with synthetic oil
Corrosion and shock resistant cast iron housing
High efficiency helical-bevel gears. 98% per stage
Normally closed breather with multiple places (Optional OtN2000)
Double lip seals on heat treated, plunge floor shafts
Shaft mounting choices include tapered bushings designs
This is a thorough offering of energy-efficient, right angle helical bevel enclosed gearing. It really is obtainable as gearmotors and a variety of reducers with torque capacities up to 119,000 inch pounds. Housing designs include footed, face and flanged configurations. Gearmotors are available in three phase high efficiency designs through 50 HP and single phase to 5 HP. We offer a selection of input and output shaft options. Additionally, you will find fixed and variable velocity motors and range of ratios available in this product offering.
Features
Accommodates insight power from ¼ Hp to 75Hp
Torque ratings up to 119,489 in-lbs
Decrease ratios up to 7,500:1
Helical – bevel – helical gear train offers affordable high and low speed solutions
Up to 94% efficient
Four input options available for all units
Two output flange options – B5 and B14
Multiple output shaft interfaces
Essential dimensions interchangeable with major competitors
Modifications / Accessories
Integral Gearmotor
Clamp Collar C-Face Input
Solid Shaft Input
3-Piece Coupled C-Face Input
CEMA Screw Conveyor Adapter
EZ Kleen Washdown Package
XT Output Seals
Backstop
Heavy Duty Output Bearings
Inch or Metric Dimensions
Common Applications
Troughing Belt Conveyors
Slider Bed Conveyors
Mixer Drives
Screw Conveyors
Bucket Elevators
General Industrial Machinery
Common Industries
Aggregate and Cement
Air Handling
Chemical, Oil, and Gas
Food, Beverage, and Pharmaceutical
Paper and Forest
Unit and Baggage Handling
Water and Wastewater
As per the developing and varying needs of customers, we offer a wide variety of Helical Bevel Gear Reducers. The technological content of our products permits an extraordinary functionality/lifespan ratio. The highly versatile Helical Bevel Gear Reducers we offer are successfully found in a multitude of industrial and civil applications. These are B-Series units that offer excellent value for money and output torque/weight ratio, especially considering that they need not a lot of servicing. Besides these, our products can be found in cast iron (sizes 063 to 163) or light weight aluminum (sizes A42 to A73) casing.
Features:
Sizes: 060-080-100-125-140-150-160
Available versions: B-fitted for engine coupling, IB with input shaft, CB with small motor, PB-fitted for electric motor coupling with flexible joint
Casing with foot FC, flange SC and universal UC
Power up to 90 kW
Gears hardened and tempered with shaved or floor profile
Gearing with 3 decrease stages
Gleason spiral bevel equipment pairs with run-in profile, mounted as second reduction stage for an increased resistance
Reduction ratios between 5, 71 and 187, 24
Torque max 13.000 Nm and admissible radial loads max 80.000 N
High-strength casings optimized with FEM evaluation and input and output flanges of grey cast-iron G200 to make sure best level performances and high reliability
Load capacity calculated and verified according to ISO 6336 and AGMA 2001
Painted with RAL 5010 blue epoxy-polyester powder
Accessories: torque arm, output flange, output shaft, shrink disk, backstop device, protection cover kit, viton essential oil seals, reinforced result, assemble/disassemble kit
Series EP right position helical bevel equipment motors provide ratios from 8:1 to 160:1 in three phases or up to 10000:1 in five stages. Motors are available up to 90kW and output torque capability up to 12,300 Nm.
The series EP helical bevel gear motor was created with integral cast feet for base or end mounting and can be offered with single or dual extended output shafts.
Products are also available because shaft mounted or with output flanges and are designed for installation horizontally or vertically. The units can also be provided with a bolt on torque response bracket and all variants can be found possibly motorised or with an insight shaft assembly.
Adding to the brand new selection of Ever-Power helical gear motors the product takes benefit of our many years of accumulated design expertise together with the use of high quality materials and parts. The outcome is a series of acceleration reducing geared motors offering high load transporting capacities, increased efficiency, tranquil running and reliability.
Top features of Helical Bevel Gear Motor
Standard motor connection
Capability to fit double essential oil seals, on insight and output shaft since required.
All models are dimensionally interchangeable with various other major manufacturers.
Units are manufactured and assembled from a family 
of modular kits for distributor friendliness minimizing inventory and maximizing availability.
Motorized units can be fitted with a backstop module and reducer Devices can be installed with a backstop and fan.
Applications:
-Conveyors, Agitators, Elevators, Cranes, Crushers
-Helical Bevel gear motors are used in industries such as chemicals, pharma, packaging, food processing, plastic material and automation etc.
Key Features:
Sizes: A40-A50-A70
Obtainable versions: EP – fitted for engine coupling, IEP – with input shaft, CEP – with compact motor
Cases with ft, flange or universal
Switch on to 4,8 Kw
Gears with shaved or ground profile
Gearing with 2 and 3 reduction stages
Hypoid bevel gears for size A40 and A50, gleason bevel gear pairs for size A70, all with run-in profile
Reduction ratios between 7,62 and 442,76
Torque max 450 Nm and admissible radial loads max 5.500 N on hollow shaft and 10.000 N on solid shaft
Cases in die-cast aluminium alloy
Superb mechanical strength while being and particularly lightweight
Load capacity calculated to ISO6336 and verified according to AGMA helical bevel gear reducer 2001-B88
Painted with RAL 5010 blue epoxy-polyester powder in according to DIN 1843
Accessories: torque arm, output flange, output shaft.
Generallntroduction of HK series:
Gear Reducer
The EP series gear units, are novel transmission gadget and made up of Y series electric motor, helical gear,Arc gear and worm gear. The gears are constructed with high wear-resisting alloy materials, specifically and finely processed.
Advantages:
1: Helical-bevel equipment two-stage reducer
2: Compact framework, high efficiency
3: Quenched 20CrMnTi for gears
4: CE, ISO9001.
5: Compact design, small volume, great appearance ,and solid capacity to be overloaded.
6: Precise division and wide range for transmission ratio.
7: The performance is up to since high as 96% with low energy usage, strong adaptability and is capable of working continually in corrosive or damp environment.
8: All- purpose make use of, convenient and low-price maintenance.
9: New seal device, strong adaptability.
10: Varied selection of motor combinations, mouting positions and struture projects.