greenhouse gear motor

• Engine gearboxes are maintenance-free, compact power sources for driving vent, screen, home and flap ventilation systems in greenhouses.
• Single phase and three phase options for your individual needs.
• Key feature of these drives certainly are a self-braking worm gear transmission and an integral linear limit switch unit.
shaft-installed gear motors are finish electromechanical drives in which the speed of the installed electrical motor is decreased to the desired value using two to four reduction stages. The drives are powerful and durable and show a compact and lightweight design.

The compact design is manufactured possible through the combination of a spur/worm gear drive with motors optimized for performance. motors also feature a 60 to 70 percent weight-loss compared to commercially obtainable drive motors. That is achieved through the consistent application of aluminium die casting technology, which ensures a high degree of rigidity for the gear and motor housing at the same time.

Each drive is produced and tested particularly for each order and customer. A sophisticated modular system permits a great diversity of types and a maximum amount of customization to consumer requirements.

Thanks to their integrated control products, the shaft-mounted gear motors will be the ideal drives for applications in reversing mode. In both rotation directions, described end positions are safeguarded by two position limit switches. This uncomplicated solution does not just simplify the cabling, but also makes it possible to configure the end positions quickly and easily. The high shut-off accuracy of the limit switches ensures safe operation shifting forwards and backwards.
This gearmotor integrates a gearbox, a power motor, and limit switches. It really is connected with a steel shaft to turn the pinions for greenhouse ventilation. With the support of electric panel, it could run and then stop after set quantity of turns. After that it can open up and close the home windows for greenhouse ventilation to correct positions.
To keep the delicate environment inside a greenhouse, weather control systems are a necessity. Numerous mechanical systems could be used in this respect; however glass vent drive systems have a tendency to be the most Greenhouse Gear Motor famous. The drive system consists of a central gearmotor connected to a 40:1 correct angle reducer with dual result shafts. These OP shafts connect to long jack shafts that spread across the roof line of the greenhouse connecting to multiple rack and pinion mechanisms that open up and close large glass screen panes in the ceiling for temperature control.
Based on the size of the application form (length of the shafting, volume and weight of the screen panes) we provides two gearmotor solutions from a modified version of their 200 series parallel shaft series – 1/5 HP and 1/20 HP. The application Is generally intermittent in use; however the motors are rated continuous since the glass pane windows may potentially be under constant, subtle adjustment throughout the day.
Gear Motor, also known as Engine Gearboxes, is a particular kind of electrical motor that is designed to create high torque while maintaining a low horsepower, or low acceleration, motor output. Equipment motors can be found in many different applications, especially for the greenhouse, livestock and agricultural sector, our motors can be found options to use roof vents, wall vents,roof shading and screening, they put on the shaft with chain couplings that compensate for alignment mistakes and can be easily eliminated without disturbing the whole shaft.
shaft-installed gear motors are complete electromechanical drives where the speed of the installed electrical motor is decreased to the desired value using two to 4 reduction stages. The drives are high performance and durable and feature a compact and lightweight design.