ep

December 26, 2019

The EP Greenhouse geared motor is a concise and lightweight reduction gear reducer with an integrated limit switch system that is ideal for assembly of a locally available electric electric motor. The gear motor is utilized in manually-controlled or climate-managed ventilation and display screen systems in greenhouses. The quick and easy-to-install EP reducer can be rainproof and windproof. The reducer has a high protection course (IP65) and can be utilized in an ambient temperature of 0-60 °C.

The low-noise gear reducer for Greenhouse includes a gearwheel transmission and a worm wheel transmission, which are integrated within an aluminum precision housing. The self-braking worm wheel transmitting means that the drive shaft is definitely locked when the reduction gear reducer is not running. The fully sealed reduction reducer comes with an growth chamber with a diaphragm to keep carefully the gear essential oil at a minimal pressure under all circumstances, even at high temperature ranges. Thanks to the use of an growth chamber, the gear reducer can be installed in any position. There are no restrictions, since there is no need for a bleed connect. The sealed reduction gearbox keeps the apparatus oil of the reducer in optimum condition because of its entire operating life time. The gear driver is suitable for discontinuous use, operating class s3-30%, with a maximum activation time of 25 minutes.

The Gear box reduction gear motor has an FT85 motor assembly flange, to which the right IEC standard motor can easily be installed (EN 50347).

The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit change system is installed within an integrated chamber and is definitely enclosed by an impact-resistant plastic cover. The limit switch system is obtainable and simple to adjust. The limit switch system’s maximum switching range is 40 or 64 revolutions of the drive shaft. The cabling is connected in spring-clip connections. The gear driver has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.

The reducer for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.

Maximum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of program of 4-pole electric motor.
Protection class IP65.
May be used in ambient temperatures of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, optimum activation time 25 moments.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC standard motor (EN 50347).
Maximum switching range of limit switch program 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).