Flexible plastic equipment racks in 0.8 Mod (32DP) pitch. These racks can provide an easy to install rotational drive of up to approx 270 degrees for example on camera focus bands. They also offer an economical solution where a large gear is required or a longer stretch (up to 2 metres) of linear movement is desired. These racks are appropriate for our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER share racks are made for high precision linear motion applications. You can expect a large collection of racks which range from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Surface Racks (MRGF – MRGFD) : Gets the highest power and precision in the EVER-POWER regular rack series. Bolt holes can be remachined as carburizing is definitely applied only within the tooth area. J Series products are also available.
Hardened Surface Racks (KRGF-H – KRGFD-H) : Temperature treated surface gears with high precision and power has excellent cost-performance ratio. J Series products are also available.
Hardened Racks (KRF-H/KRFD-H) : This is a solid rack manufactured from Chromoly steel, treated simply by carburizing. Has high-strength, high wear level of resistance, and allows downsizing of SR racks. J Series items are also available.
Hardened Racks (SRF-H/SRFD-H) : Stable Hardened racks with high power, extended life span are affordable. J Series products are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Metal Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack has the same tooth height and encounter width sizes, more compact and reasonably priced compared to SRF Racks
Steel Racks (SR) : Low cost, large choices of modules and number of tooth. J Series items are also available.
Metal Racks w/ Machined Ends (SRF) : Low cost, large choices of modules and quantity of the teeth. J Series products are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low cost, large selections of modules and number of tooth. J Series items are also available.
Stainless Steel Racks (SUR•SURF•SURFD) : Suitable for food machinery due to SUS304 materials\’s rust-resistant quality.
Plastic-type Racks (DRF/DRFD/DRFK) : Plastic racks with little dimensional change, absorb lesser water than MC Nylon racks. J Series items are also available.
Plastic Racks (PR•PRF) : Made form MC nylon, can be used without lubrication.
Brass Racks (BSR) : Small pitch racks manufactured from free-cutting brass, excellent workability and high rust resistance.
Steel Round Racks (SRO – SROS) : Convenient in applications where the rack has the reciprocal movement. S Type is simple to install.
Stainless Steel Circular Racks (SURO) : Same dimensions as SRO racks, except in stainless steel. Make use of where rust-resistance is necessary.
Surface Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent products with high precision and strength, and low sound and abrasion characteristics.
Steel Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration because of larger get in touch with ratio of helical gears.
Molded Flexible Racks (DR) : Found in applications because of its flexibility, where metallic racks do no possess this attribute. Pinions and accessories are also available.
Molded Flexible Rack Clamps (SRS) : Used to secure Molded Versatile Racks.
Molded Flexible Rack Pinions (SSDR) : Spur pinions utilized for molded versatile racks.
Flexible Rack Guide Rails (ARL) : Guideline Rails for Molder Versatile Racks.
We offer as standard a wide variety of Racks in Metric and Imperial sizes. Spur Racks are available in Steel (En8) or more to 2 metres long. Stainless Steel and Delrin (Plastic-type material) Racks are produced with Spur and Helical tooth forms, square and circular sections up to 400mm in length. Alternative materials are available on ask for. Moulded Hostaform Racks are available to offer an economical alternative where less torque is required.
Variable stiffness can improve the capacity for human-robot interacting. Predicated on the mechanism of a flexible rack and gear, a rotational joint actuator called vsaFGR is proposed to modify the joint stiffness. The flexible gear rack could be regarded as a combination of a non-linear elastic component and a linear adjusting system, providing advantages of compactness. The joint stiffness is usually in the range of 217-3527 N.m/rad, and it is inversely proportional to the 4th-order of the gear displacement, and almost independent from the joint angular deflection, providing benefits of quick stiffness regulation in a short displacement of 20 mm. The gear displacement with respect to the flexible equipment rack is usually perpendicular to the joint loading force, so the power required for stiffness regulating is as low as 14.4 W, providing benefits of energy saving. The high compactness, great stiffness range and low power price of vsaFGR are proved by simulations and experiments.
Flexible plastic equipment racks in 0.8 Mod (32DP) pitch. These racks can provide an easy to install rotational drive of up to approx 270 degrees for example on camera focus rings. They also provide an economical remedy where a large gear is required or an extended stretch (up to 2 metres) of linear movement is desired. These racks are appropriate for our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER share racks are made for high precision linear movement applications. We offer a large collection of racks ranging from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Floor Racks (MRGF – MRGFD) : Has the highest strength and precision in the EVER-POWER standard rack series. Bolt holes can be remachined as carburizing is usually applied just within the tooth area. J Series items are also available.
Hardened Surface Racks (KRGF-H – KRGFD-H) : Temperature treated surface gears with high precision and strength has excellent cost-overall performance ratio. J Series items are also available.
Hardened Racks (KRF-H/KRFD-H) : That is a solid rack made of Chromoly steel, treated simply by carburizing. Has high-power, high wear level of resistance, and enables downsizing of SR racks. J Series items are also available.
Hardened Racks (SRF-H/SRFD-H) : Steady Hardened racks with high strength, extended life span are affordable. J Series products are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Steel Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack has the same tooth elevation and face width sizes, more compact and reasonably priced in comparison to SRF Racks
Steel Racks (SR) : Low priced, large selections of modules and number of tooth. J Series products are also available.
Steel Racks w/ Machined Ends (SRF) : Low cost, large choices of modules and quantity of the teeth. J Series items are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low priced, large selections of modules and amount of tooth. J Series products are also available.
STAINLESS Racks (SUR•SURF•SURFD) : Ideal for food machinery because of SUS304 material\’s rust-resistant quality.
Plastic material Racks (DRF/DRFD/DRFK) : Plastic racks with small dimensional change, absorb lower water than MC Nylon racks. J Series items are also available.
Plastic Racks (PR•PRF) : Made form MC nylon, can be used without lubrication.
Brass Racks (BSR) : Small pitch racks made of free-cutting brass, excellent workability and high rust resistance.
Steel Circular Racks (SRO – SROS) : Convenient in applications where in fact the rack has the reciprocal motion. S Type is simple to install.
Stainless Steel Circular Racks (SURO) : Same dimensions as SRO racks, except in stainless steel. Make use of where rust-resistance is necessary.
Ground Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent products with high precision and strength, and low noise and abrasion characteristics.
Metal Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration because of larger contact ratio of helical gears.
Molded Flexible Racks (DR) : Used in applications due to its flexibility, where steel racks do no have this attribute. Pinions and add-ons are also available.
Molded Versatile Rack Clamps (SRS) : Used to secure Molded Flexible Racks.
Molded Versatile Rack Pinions (SSDR) : Spur pinions utilized for molded versatile racks.
Flexible Rack Information Rails (ARL) : Information Rails for Molder Versatile Racks.
You can expect as standard an array of Racks in Metric and Imperial sizes. Spur Racks can be found in Steel (En8) and up to 2 metres in length. Stainless Steel and Delrin (Plastic-type) Racks are created with Spur and Helical tooth forms, square and circular sections up to 400mm long. Alternative materials are available on ask for. Moulded Hostaform Racks are available to offer a cost-effective alternative where much less torque is required.
Variable stiffness can enhance the capability of human-robot interacting. Predicated on the system of a versatile rack and gear, a rotational joint actuator called vsaFGR is certainly proposed to modify the joint stiffness. The flexible gear rack could be regarded as a combination of a non-linear elastic component and a linear adjusting mechanism, providing advantages of compactness. The joint stiffness is definitely in the number of 217-3527 N.m/rad, and it is inversely proportional to the 4th-purchase of the apparatus displacement, and almost independent from the joint angular deflection, providing benefits of quick stiffness regulation in a brief displacement of 20 mm. The gear displacement with regards to the flexible gear rack is perpendicular to the joint loading force, so the power required for stiffness regulating is really as low as 14.4 W, providing advantages of energy saving. The high compactness, great stiffness range and 
low power cost of vsaFGR are proved by simulations and experiments.