Fan Electric motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, removed from unused 18” or 24” China Surroundings 
Compressor diameter TPI fans. Made to operate an 18” or 24” enthusiast blade (blade NOT included).
This motor has a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All of the wiring in the middle of your electric motor, capacitor and quickness control switch is still installed however the cord itself is generally detached as seen in the photos. (Discover “Control Notice” below for change type.)
T (See “Program Notice” below for utilize in a variety of other applications.)
Dimensions: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft is usually½” (0.500″) diameter x 2 ½” lengthy with a collection screw smooth. There are (4) threaded mounting lugs on the front of the motor, ½” long x .16 dia. with washers and nuts. The studs appear to ‘ve got 4mm threads and also to be on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to the next).
Rate: The approximate electric motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Path of rotation (facing the shaft end of the electric motor) is Clockwise.
Control Take note: Motors will come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we have demonstrated BOTH variations in the images). These two types of switches both control the engine just as (but you possess a rotating knob and you have got a pull-chain). In the event that you order several electric motor at the same time, we can do our better to supply your order with each one sort of control or the excess.
Application Note: Do NOT use this electric electric motor in a nonfan app. This is a completely enclosed fan electric motor and designed to have constant ventilation over the engine electric fan motor china casing for cooling. The housing isn’t vented and the electric powered motor will overheat and get into automated thermal overload if run in a nonfan program where there isn’t solid ventilation past the electric motor. (Caution Note: the electrical motor will restart immediately when it cools back off.) Using this electric motor for applications aside from 18 & 24″ TPI fans could also overload the engine and cause it to proceed into automated thermal overload. (Your companion blade from another manufacturer may have a steeper blade position.)
Origin: This electric electric motor is manufactured in China.