A chain and sprocket drive is a kind of power transmission in which a roller chain engages with several toothed wheels or sprockets, found in engines as a drivefrom crankshaft to camshaft.
Ever-electric power is proud to inventory a wide selection of Sprockets along with our huge selection of agriculture, gardening, preparing and outdoor products. We stand behind all 26,000 products we sell with our Satisfaction Guarantee. Customer Service may be the cornerstone of us business, and has recently been for over 50 years.
Application
Ever-power travel sprockets provide rugged, reliable service and feature replaceable tooth plates for easy field maintenance. Tooth plates for 102 and 142 series chain can be found with a segmental/symmetrical reversible tooth profile. The 142 DBL, TPL along with the 175 and 260 series use our nonsymmetrical profile.
Drive sprockets weren’t always made to be bolted about. At one time they were welded onto the ultimate drive motor and had to be trim off if they were replaced. Eventually, welded-on adapters were set up that allowed the sprocket to end up being bolted on, and more modern designs utilize the bolted approach altogether.
When someone sends in your final drive motor for us to check out or?rebuild/reman, we advise them to eliminate the sprocket. We don’t will need the sprocket in location to evaluate the electric motor and the added weight (which may be significant) unnecessarily increases your shipping costs.
Signs of Sprocket Wear
One’s teeth on a travel sprocket are where you search for wear . They must be tall and toned at the end, not razor-sharp or dished by the end. And the sprocket, and more specifically its teeth, start to wear, its diameter becomes small. This causes what’s referred to as a pitch mismatch, where in fact the teeth on the sprocket no longer interact with the track backlinks as effectively. This may accelerate the don of the sprocket and reduce the efficiency of your tools.
If your sprocket shows sign of excessive wear, then its time to displace it before it starts to cause abnormal track wear or commences to negatively affect the performance of your final drive electric motor.
Preventing Sprocket Wear
Among the key methods to prevent accelerated sprocket use is to check the track stress. If the tension is too tight, it will cause don on the sprocket teeth. We’ve talked before about the value of keeping the undercarriage clean, and the condition of the undercarriage make a difference the track tension (especially if there can be a build-up of dried mud and particles). That’s part of the factor we put so much focus on keeping the undercarriage clean
Conclusion
Without a functioning drive sprocket, your track drive won’t be able to propel your machine. Fortunately, there are ways to help your travel sprocket go longer: keep the track tension at a proper level and preserve your undercarriage clean.
DRIVE SPROCKET
The undercarriage of your track equipment should be inspected regularly. If you find early wear or harm to your tracks, a worn sprocket may be the cause.
15 cogs / teeth
16.77 inches in diameter
12 equally spaced bolt holes
Fits the next Bobcat Compact Track Loaders: T180, T190, T550, T590
Parts can vary according to your serial number.
All Ever-vitality sprocket tooth profiles are induction hardened 
to 55 Rockwell C., and so are replaceable. The substitute and protection of tooth plate segments will not require removing of the travel shaft, bearings, etc. Ever-power also designs custom split hub elements for retrofit applications that minimize discipline labor costs.
At first glance, you might feel that if you’ve seen one travel sprocket, you’ve seen all of them. However, Ever-electrical power features added an I.D. lip and spiral ring that captivate the needle bearing along with an external snap ring that heightens performance and stability. While easy to overlook, it’s this focus on depth that the racer has come to expect from Ever-power.
An We.D. lip and spiral band that captivate the needle bearing
Exterior snap ring caps sprocket about drum & increases durability
CNC-machined teeth feature a corrosion-resistant finish
Specifics:
Chain Type: #219
Tooth Configuration: Standard