Deep groove ball bearings are the hottest bearing type. Consequently, they are available from LYHY in many models, variants, series and sizes. Deep groove ball bearings will be versatile, self-retaining bearings with stable outer rings, inner rings and ball and cage assemblies. These sort of bearings happen to be of basic design, durable in procedure and easy to maintain; They are available in single and twice row models and in start and sealed variants.
In a deep-groove ball bearing, the race dimensions are near the dimensions of the balls that run in it. Deep-groove ball bearings can support larger loads. As a result of development technology used, start bearings can still have switched recesses on the external ring for seals or shields. Due to their low frictional torque, they happen to be well suited for high speeds.
Packing:
1. Bearing surface is protected with the anti-rust oil first; In that case wrapped with the plastic-type material film;
2. Then loaded the Deep Groove Ball Bearing china roller bearings with draft papered specialist belts;
3. At last, packing the bearings with wood box fully at the outer 
packing to invoid the rust or the moist;
4. We can as well packing the bearings relating to clients’ special requirement;
Feather
High quality steel: Ultra clean steel to extend bearing life simply by up to 80%
Advanced grease technology: LYHY lubricants that can extend grease life and performance.
High Grade Balls: Tranquil and smooth procedure even at high speed
Super done raceways: Specially honed to reduce noise and boosts lubricant distribution and your life.
Paten seals: Provide resistance to contamination in the toughest environments
Quality Assured: 100% assessment ensures total product quality
Our deep groove ball bearings deliver trustworthy performance in a variety of applications and conditions. With super-finished raceways and controlled geometries, our premium design helps ensure consistent quality. Our portfolio comes with normal, thin section, narrow, vast and miniature and extra-little deep groove ball bearings that span 3 mm to 400 mm bore sizes. The prolonged product line includes a complete supplying of available, shields, seals and snap band combinations.
Its chrome steel construction helps it be durable and resistant to deformity under heavy loads. The rubber seals on both sides of the bearing continue to keep lubricant in and contaminants out. This single-row sealed ball bearing is normally for use in applications that require merged radial and axial loads and a dependence on high running accuracy at great rotational speeds. Such applications consist of clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile equipment, among others.