We – EPG Team the largest gearbox & motors , torque limiter couplings and gears factory in China with 5 diverse branches. For far more specifics: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
one. Mixers:
1.1 Computerized Container Mixer
Automated container mixer is wor ept with constant materials trolleys, the container fills the components and lifted up and connnected tightly with mixing head automatically. The mixing head tilts collectively with the containers, and then acquire the homogeneous mixing end result, soon after ending mixing as per placing time, and return to original position, the entire approach will be managed by PLC
Primary Functions:
Several removable containers for circular procedure
High efficiency
Adopting PLC to realize automation
Homogenized combination
No curing granule
Practical for cleansing and routine maintenance
Risk-free and relaiable procedure
Technical Knowledge:
| Model | Volume (L) | Output (kg/tank) | Mixing Motor (kw) | Tilting Motor (kw) | Crushing Motor (kw) | Mixing Time (min) | Management Mode | Overall Proportions (MM) |
| FHJ-15 | 15 | eight | one.five | five-10 | PLC | 750*480*950 | ||
| FHJ-120 | a hundred and twenty | 60 | five.5 | .2 | five-10 | PLC | 1800*1800*1950 | |
| FHJ-150 | a hundred and fifty | 70 | 5.five | .37 | two.two | 5-10 | PLC | 2150*1100*2300 |
| FHJ-300 | three hundred | 150 | 15 | 3 | two.2 | 5-ten | PLC | 2150*1100*2300 |
| FHJ-600 | 600 | 300 | 22 | 4 | four | five-10 | PLC | 26Mechanical overload protection products like the Tsubaki Torque Limiter can assist reduce the threat of vital part failure.fifty*1250*2700 |
| FHJ-1000 | 1000 | five hundred | thirty | four | 4 | five-10 | PLC | 2900*1550*3100 |
| FHJ-2000 | 2000 | a thousand | 45 | 5.five | five.five | 5-ten | PLC | 3500*2350*3650 |
one.2 High Pace Pre-Mixer:
Functions:
High efficiency & straightforward procedure
Simple colour changing, protected cleansing
Mixed mixing & crushing as a single
Mixing time preseting, brief & homogeneous
Exceptional sealing, powder lea ept free of charge
Vertical or horizontal sort as optional
Specialized Information:
| Model | Volume (L) | Mixing Motor (kw) | Crushing Motor (kw) | Mixing Time (min) | General Dimensions (mm) |
| GHJ-twenty | twenty | .fifty five | .37 | three-5 | 700*500*800 |
| GHJ-100 | 100 | 3 | 1.5 | three-5 | one thousand*600*900 |
| GHJ-200 | two hundred | five.five | 3 | 3-five | 1500*900*1400 |
| GHJ-three hundred | three hundred | 7.5 | four | 3-six | 1800*900*1400 |
| GHJ-500 | 500 | 15 | five.5 | 4-6 | 1800*1300*1800 |
| GHJ-800 | 800 | eighteen.five | seven.5 | four-6 | 1900*1300*2000 |
| GHJ-a thousand | 1000 | 22 | seven.5 | four-6 | 2300*1400*2000 |
one.3 Double Cone Mixer:
This twin-cone mixer is composed of a rotating container with two cones and two stirrers. This equipment is relevant for powder coating, pharmaceutical, chemical, foodstuff, dyestuff, and other multi-compound components. It has remarkable effect in mixing powders and particles with fairly excellent fluidity. Its barrel is produced of stainless steel, which is polished the two within and outside, showcasing stunning visual appeal and simple operation.
Specialized Knowledge:
| Design | Quantity (L) | Output (kg/tank) | Rotating Motor (kw) | Mixing Motor (kw) | Mixing Time (min) | Total Dimensions (mm) |
| SXH-100 | 300 | 150 | one.five | one.5 | -thirty | 1760*830*2030 |
| SXH-two hundred | 400 | 200 | 1.5 | 1.five | -30 | 1830*830*2150 |
| SXH-three hundred | 600 | three hundred | 2.two | one.five | -thirty | 1980*one thousand*2275 |
| SXH-500 | one thousand | five hundred | 4 | four | 1-30 | 2630*1140*2620 |
| SXH-1000 | 2000 | a thousand | 5.5 | five.5 | -thirty | 3060*1440*2860 |
| SXH-1500 | 3000 | 1500 | seven.five | 7.five | -30 | 3700*2000*2970 |
| SXH-2000 | 4000 | 2000 | eight.five | eight.5 | -30 | 3800*2500*3500 |
two. Twin-Screw Extruder
2.1 Higher torque & Substantial Speed Rotation Twin-Screw Extruder:
Main Functions:
*Full Gearbox from expert EPT maker, reduced sounds, durable longevity
*Substantial screw velocity, higher shearing, rapid discharge
*Unbiased lube oil cooling system style
*Torque limiter to protect the drive train
*Ideal for reclaim powder, particular powder generation
*Split style of barrel and liner inserts for effortless cleansing and maintainence
*Best & Facet feeding alternatives
*Other functions exact same as conventional kind extruder
Technical Parameters:
| Product | Capability (kg/h) | Screw Diameter (mm) | Screw Duration (mm) | Screw Velocity (r/min) | Principal Motor (kw) | Feeder Motor (kw) | Heating Electricity (kw) | General Proportions (mm) |
| TSX-forty | 80-260 | 40 | 16D | -800 | 11/fifteen/18.five | .55 | eight | 1850*700*1750 |
| TSX-52 | one hundred fifty-450 | fifty two | 16D | -800 | 22/30/37 | .75 | ten | 2700*900*2200 |
| TSX-sixty five | 400-a thousand | sixty five | 16D | -800 | 45/fifty five/75 | one.one | 12 | 2900*one thousand*2400 |
| TSX-seventy five | 800-1200 | 75 | 16D | -800 | 75/ninety | one.five | sixteen | 3100*1200*2500 |
| TSX-eighty five | 1200-1800 | 85 | 16D | -800 | ninety/a hundred and ten | two.2 | 20 | 3700*1500*2900 |
two.2 Standard Sort Co-Rotation Parallel Twin Screw Extruder
Characteristics:
*Strong shearing, effortless cleansing
*Correct vehicle temperature manage, high cooling & heating exchagne
*Hinged clamshell kind barrel opening, segmented liners for simple changing and value conserving
*Feeder easy assembly & disassembly, internal framework to keep away from agglomeration
*Configurable screw utilized for defferent powder formulation
*Screw and barrel undertake particular materials like Cr12MoV, CPM, etc., large donning resisting
*Fairly gearbox with low noise dB degree
*Torque limiter to defend the drive teach
*Lower vitality usage
Complex Parameters:
| Product | Potential (kg/h) | Screw Diameter (mm) | Screw Size | Screw Speed (r/min) | Main Motor (kw) | Feeder Motor (kw) | Heating Electrical power (kw) | Overall Proportions (mm) |
| SLJ-40 | eighty-220 | 40 | 16D | -five hundred | 11/fifteen/eighteen.5 | .fifty five | 4 | 1800*600*1700 |
| SLJ-fifty | 150-three hundred | 50 | 16D | -five hundred | 22/thirty | .75 | eight | 2600*700*2000 |
| SLJ-fifty five | 300-400 | 55 | 16D | -five hundred | 30/37 | .75 | 8 | 2700*900*2300 |
| SLJ-sixty | 400-600 | sixty | 16D | -500 | 45 | 1.one | twelve | 2750*1000*2350 |
| SLJ-seventy five | 600-800 | 75 | 16D | -500 | 55 | 1.5 | 12 | 2900*1100*2400 |
| SLJ-80 | 800-1200 | 80 | 16D | -500 | 75/ninety | two.2 | twenty | 3700*800*2800 |
two.3 Lab Type Extruder
Specialized Parameters:
| Model | Ability (kg/h) | Screw Diameter (mm) | Screw Size | Screw Velocity (r/min) | Primary Motor (kw) | Feeder Motor (kw) | Heating Electrical power (kw) | Total Dimensions (mm) |
| TSX-20 | .2-10 | 22 | 16D | -600 | 2.2-four | .one | two | 1600*300*850 |
| SLJ-thirty | one-30 | 30 | 16D | -500 | 3-5.five | .eighteen | 3.2 | 1430*550*1300 |
| SLJ-32 | forty-80 | 32 | 16D | -500 | seven.5/11 | .25 | 3.2 | 1600*five hundred*1500 |
three Cooling Belt
three.1 Water Cooled Cooling Belt with Flaker:
Features:
Consistent quality imported steel belt
Bottom cooling drinking water spraying system, put in heating and cooling gadget
Equipped with guidebook gadget to steer clear of deforming
Better cooling end result, higher efficient productivity
Few upkeep and straightforward cleansing
Chips thickness and roller speed adjustable
Crusher with finger pin and tooth sort
Minimized cross contamination, basic operation
Technological Parameters:
| Product | Roller Dia. (mm) | Belt Width (mm) | Belt Size (mm) | Generate Motor (kw) | Capacity (kg/h) | Cooling Mode | General Dimensions (mm) |
| GDY-406 | 220 | 600 | 4000 | one.5 | 200-400 | Cooled H2o | 4000*750*1600 |
| GDY-508 | 325 | 800 | 5000 | three | 400-500 | Cooled Drinking water | 5000*900*1800 |
| GDY-510 | 325 | a thousand | 5000 | 3 | 500-700 | Cooled Drinking water | 5000*1100*1900 |
| GDY-610 | 440 | a thousand | 6000 | four | 600-800 | Cooled Water | 6000*1100*1900 |
| GDY-612 | 440 | 1200 | 6000 | 4 | 700-900 | Cooled Drinking water | 6000*1400*1900 |
| GDY-712 | 600 | one thousand | 7000 | five.5 | 900-1200 | Cooled Drinking water | 7000*1400*2000 |
three.2 Air Cooled Variety Caterpillar Cooling Belt with Flaker:
Characteristics:
Stainless metal created caterpillar, air cooling
Flake chips thichness and conveying pace adjustable
Reasonable design and style for cooling rollers within, specialist surface area therapy to stay away from h2o lea ept and rust
Set up with simplified air conditioning device
Risk-free operation, like crisis button, clockwise and counter-clockwise rotation.
Technical Parameters:
| Model | Roller Dia. (mm) | Belt Width (mm) | Belt Duration (mm) | Drive Motor (kw) | Blower Motor (kw) | Capacity (kg/h) | Cooling Mode | General Dimensions (mm) |
| JFY-204 | a hundred and sixty/a hundred and sixty | four hundred | 2000 | .55 | 200-four hundred | thirty-100 | Chilled Water&Air | 2000*450*900 |
| JFY-406 | one hundred sixty/220 | 600 | 4000 | .seventy five | four hundred-500 | one hundred-220 | Chilled Drinking water&Air | 4000*850*950 |
| JFY-508 | one hundred eighty/325 | seven hundred | 5000 | .seventy five | 500-700 | 220-400 | Chilled Water&Air | 5000*1050*1200 |
| JFY-510 | 180/325 | 800 | 5000 | one.one | 600-800 | 400-500 | Chilled Drinking water&Air | 5000*1150*1200 |
| JFY-610 | 180/325 | 800 | 6000 | 1.1 | seven-hundred-900 | five hundred-seven-hundred | Chilled Drinking water&Air | 6000*1150*1200 |
| JFY-710 | one hundred eighty/325 | a thousand | 6000 | one.five | 900-1200 | 600-900 | Chilled H2o&Air | 7000*1250*1450 |
| JFY-812 | one hundred eighty/325 | one thousand | 7000 | 2.two | 900-1200 | 900-1200 | Chilled Water&Air | 8000*1650*1600 |
three.3 PU Type Air Cooled Cooling Belt
Attributes:
Adjustable thichness and roller velocity
Air cooled to stay away from cross contamination
Roller and crusher equipped with overload security
Higher efficiencies
A single piece PU belt to faciliate straightforward cleaning and maintenance
Compact design for minimal room
Technical Parameters:
| Product | Roll Dia. (mm) | Band Width (mm) | Band Size (mm) | Motor Energy (kw) | Throughput (kg/h) | Proportions (mm) |
| PFY-104 | 156 | 400 | 1000 | one.one | 50 | a thousand*870*1050 |
| PFY-206 | 220 | 600 | 2000 | one.1 | one hundred fifty | 2000*1150*1100 |
| PFY-208 | 445 | 800 | 2000 | two.two | three hundred | 2000*1100*1100 |
| PFY-210 | 445 | 1000 | 2000 | 2.two | 500 | 2000*1300*1100 |
| PFY-310 | 622 | a thousand | 3000 | two.2 | 800 | 2000*1300*1200 |
4 ACM (Air Classifier Mill) Grinding Program
Functions:
Safety in accordance with EU explosion resistant standard ATEX/PSR11
Low sound design and style (from mill to supporter technique)
Particle dimension distribution adjustable on request
Mill entire body temperature and air consumption volume monitoring
Rotary sieve with exclusive layout and tough for mesh dress in problem
Total grinding program developed for powder dust totally free
Finished powder products with far more than 98 percent
Higher output, effortless operation cleaning and upkeep
Specialized Parameters:
| Design | Mill Motor kw | Rotor rpm | Classifier Motor | Classifier rpm | Supporter kw | Air cbm/h | Capacity kg/h | Overall dimensions mm |
| ACM-02 | 2.2 | 12000 | .37 | -3000 | 3 | 350 | two-thirty | 1430*550*1300 |
| ACM-05 | 4 | 11000 | .seventy five | -3000 | four | 800 | 30-80 | 2100*a thousand*2150 |
| ACM-ten | 7.five | 7000 | 1.five | -3000 | 11 | 2500 | one hundred-260 | 6200*1250*3200 |
| ACM-fifteen | 11 | 7000 | 1.5 | -3000 | 15 | 3000 | two hundred-350 | 6500*1300*3300 |
| ACM-20 | 15 | 6600 | 2.2 | -3000 | 22 | 3500 | three hundred-four hundred | 7500*1300*3600 |
| ACM-30 | 22 | 5500 | three | -3000 | thirty | 4500 | 400-550 | 7900*1500*3600 |
| ACM-forty | thirty | 4600 | 5.5 | -3000 | 37 | 5500 | 600-800 | 8000*1700*3600 |
| ACM-50 | 37 | 4000 | seven.5 | -3000 | 45 | 6500 | 1000-1200 | 9000*1900*3900 |
| ACM-sixty | forty five | 3500 | seven.5 | -3000 | fifty five | 8000 | 1200-1600 | 9000*2000*4000 |
Business:
Xihu (West Lake) Dis.solar is a foremost producer in China of Powder Coating Creation Equipments, i.e. Mixers, Extruders, Cooling Belt and Air Classifier Mill. We inherit 30 many years of encounters in this ept and have exported to virtually 30 nations and locations in the earlier ten several years, and acquire commonly great reputations.
We handed CE certification approval and ATEX explosion resistant test, and many others. international standards, we do know how to meet up with the diversified and custom-made made requests of our clients.
Our eternal enterprise philosophy: consistant top quality, effective interaction, liable support.
The use of original tools manufacturer’s (OEM) component quantities or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating product use and compatibility. Our business and the detailed replacement parts contained herein are not sponsored, accepted, or made by the OEM.
