pto gearbox
two) Loosen the bolts only when fitting 
the shafts. DO NOT get rid of the bolts entirely. If taken off they may possibly fall into the housing and result in a failure. The box should be disassembled to retrieve the bolts 
if this happens.
1) Tighten bolts to avoid oil leaking during operation. (The bolts have a seal below their heads.)
Get care when tightening the four x locking bolts inside of the housing. These bolts resolve the detachable splined shafts in area.
Note: When fitting splined shafts.
Click on on drawing to enlarge.
1:1.eighty five speed increaser with thirteen/4″Z20 splined output shaft.
No other company has actually had the ability to take on our brand-new pto gearbox.